CEPO DRILLS
Needlepoint Accuracy
The CePo™ Bone Drills are highly recommended for initiating osteotomies for all sizes and types of implants. The sharp, chatter-free drilling assures accuracy of position, angle and depth.
The CePo drills come in 2 kinds of markings
Markings type 1 (1040 Series) is typically for bone level procedures.
The lower border line of each marking corresponds to the threaded length of the implant: short (7mm), medium (10mm) and long (14mm).
Markings width is 0.5mm.
Markings type 2 (1140 Series) is typically for flapless placement.
The upper border line of each marking correspond to the implant’s platform: short (11mm), medium (14mm) and long (18mm), i.e. flush with the top of the gingiva.
Markings width is 2mm.
Example of Markings 1 (left side) and Markings 2 (right side) for a Medium implant
NEEDLEPOINT bulls-eye position accuracy
PRECISE REPOSITIONING of angles in extracted sockets
STATIC PIERCING of tissue without epithelial entrapment
CHOICE OF LONG OR SHORT SHANKS for easy access
PACKAGES OF 2 DRILLS, MARKINGS TYPE 1
MR-1041 (2 CePo Pilot Drills for 1.8 mm Implants, Long)
 |
2 CePo Pilot Drills for 1.8 mm Implants, Long Laser markings at 7, 10 & 14 mm correspond to the thread length of the implants. |
MR-1042 (2 CePo Pilot Drills for 1.8 mm Implants, Short)
 |
2 CePo Pilot Drills for 1.8 mm Implants, Short Laser markings at 7, 10 & 14 mm correspond to the thread length of the implants. |
MR-1045 (2 CePo Pilot Drills for 2.2 mm Implants, Short)
 |
2 CePo Pilot Drills for 2.2 mm Implants, Short Laser markings at 7, 10 & 14 mm correspond to the thread length of the implants. |
MR-1046 (2 CePo Pilot Drills for 2.4 mm Implants, Short)
 |
2 CePo Pilot Drills for 2.4 mm Implants, Short Laser markings at 7, 10 & 14 mm correspond to the thread length of the implants. |
PACKAGES OF 2 DRILLS, MARKINGS TYPE 2
MR-1141 (2 CePo Pilot Drills for 1.8 mm Implants, Long)
 |
2 CePo Pilot Drills for 1.8 mm Implants, Long Laser markings at 11, 14 & 18 mm correspond to the length from the tip to the gingival surface of the Anew and Atlas implants. |
MR-1142 (2 CePo Pilot Drills for 1.8 mm Implants, Short)
 |
2 CePo Pilot Drills for 1.8 mm Implants, Short Laser markings at 11, 14 & 18 mm correspond to the length from the tip to the gingival surface of the Anew and Atlas implants. |
MR-1145 (2 CePo Pilot Drills for 2.2 mm Implants, Short)
 |
2 CePo Pilot Drills for 2.2 mm Implants, Short Laser markings at 11, 14 & 18 mm correspond to the length from the tip to the gingival surface of the Anew and Atlas implants. |
MR-1146 (2 CePo Pilot Drills for 2.4 mm Implants, Short)
 |
2 CePo Pilot Drills for 2.4 mm Implants, Short Laser markings at 11, 14 & 18 mm correspond to the length from the tip to the gingival surface of the Anew and Atlas implants. |
MR-1147 (2 CePo Pilot Drills for 2.8 mm Implants, Short)
 |
2 CePo Pilot Drills for 2.8 mm Implants, Short Laser markings at 11, 14 & 18 mm correspond to the length from the tip to the gingival surface of the Anew and Atlas implants. |
CePo System 1 Instructions for Use (IFU)
To download and/or print this IFU click here.
CePo System 2 Instructions for Use (IFU)
To download and/or print this IFU click here.
CePo Product Range (Digital Product Catalogue)
Instructions for Safe Disposal of CePo Pilot Drills and CePo Drills