ATLAS

Retain, Stabilize, Cushion

Atlas1

The Atlas® Implant System is designed for long-term use to retain and stabilize dentures.

Eliminating the hardware typically associated with overdentures, the Atlas System uses no O-rings, no housings, no adhesives.

Instead, the unique Tuf-Link™ silicone reline is mechanically secured within the denture by an undercut and provides a cushioned fit for stress-free denture insertion, retention, and removal.

Advantages and Limitations of Dentures

For the edentulous patient, dentures offer many advantages compared to the alternatives. Dentures can be esthetically pleasing, they provide support for both vertical and horizontal profiles, they are easy to maintain and cost effective.

However, these benefits are often hampered by patient discomfort, difficulties in chewing, problems with pronunciation, laughing and smiling.

To compensate, denture wearers often change their daily routines and diets in ways that expose them to general health risks. Today with greater focus on the relationship between dentistry and systemic health, we recognize that edentulism has a direct impact on patients’ overall health with problems ranging from psychological, to nutritional and digestive concerns.

As a result, many dentists are hesitant to readily recommend dentures as a viable solution, but one treatment option will dramatically improve the quality of life of denture patients.

 The Simple Solution for Denture Comfort

Dentatus Atlas Implant System consists of 4 or 6 implants and the Tuf-Link silicone liner. The liner compensates for ridge changes and bone resorption, cushioning the denture-ridge interface while optimizing patient comfort.

This is accomplished without the use of housings, O-rings or adhesives and therefore overcomes restrictions of parallelism, space, stress, and the other limiting obstacles of the edentulous arch. Patients will no longer suffer with sore spots caused by a hard-acrylic denture base rubbing against the sensitive gingival tissue.

Tuf-Link is easy to maintain and retains its resiliency for 18-24 months. Tuf-Link will not disintegrate over time, ensuring protection of the implants.

The minimally invasive Atlas procedure is often performed without a surgical flap, depending on ridge anatomy. Atlas implants can be loaded immediately, and thus patients can leave the single-visit chairside procedure with a cushioned, comfortable, and stable denture. Patients express very high satisfaction while wearing their Atlas retained dentures and appreciate the ease of inserting and removing their dentures.

With Atlas Denture Comfort, patients are assured of having prostheses that look and feel like their very own teeth. They enjoy healthier and better-looking smiles. Bone loss in the ridge is decreased, and patients experience substantial relief from the pain and discomfort of ill-fitting dentures. The stabilization of their prosthesis gives patients a heightened quality of life that only comes from the confidence of being able to laugh, to speak and to eat like once before.

Step 1: Placing the Implants

Photos courtesy of Dr. Wolfram Bücking

Step 2: Denture Relining

FEATURE & BENEFITS
ATLAS PRODUCTS
LINKS AND DOWNLOADS
VIDEOS

OVERCOMES RESTRICTIONS of parallelism and space

FLAPLESS INSTALLATION

EASY ONE-STAGE PROCEDURE

STRESS-FREE denture placement and removal

60 MINUTE procedure

 

ATLAS IMPLANTS

Packs of 2 Sterile Implants with 5 Marking Caps
Thread
Length
Diameter Tip to
Platform
Length
Overall
Length
1.8 mm 2.2 mm 2.4 mm 2.8 mm
7 mm AT-18S-R AT-22S-R AT-24S-R 11 mm 14 mm
10 mm AT-18M-R AT-22M-R AT-24M-R AT-28M-R 14 mm 17 mm
14 mm AT-18L-R AT-22L-R AT-24L-R AT-28L-R 18 mm 21 mm

SURGICAL KITS

AK-3 (Surgical Kit in Organizer)
(Not available in the US)
1 CePo Pilot Drill for 1.8 mm Implants (Short)
1 CePo Drill for 2.2 mm Implants
1 CePo Drill for 2.4 mm Implants
1 Atlas R/A Handpiece Driver
1 Hand Adapter for R/A Driver
1 Half-Round Denture Forming Instrument
1 Grooved Denture Forming Instrument
1 Spherical Denture Forming Instrument
1 X-Ray Template
1 Steri-Box Organizer
1 Instructions for Use
AK-5 (Surgical Kit in Organizer)
(US only)
2 CePo Pilot Drills for 1.8 mm Implants (1 Short & 1 Long)
1 CePo Drill for 2.2 mm Implants
1 CePo Drill for 2.4 mm Implants
1 CePo Drill for 2.8 mm Implants
1 Atlas R/A Handpiece Driver
1 Hand Adapter for R/A Driver
1 Half-Round Denture Forming Instrument
1 Grooved Denture Forming Instrument
1 Spherical Denture Forming Instrument
1 Ratchet Driver
1 Atlas Ratchet Insert
5 Moisture-Absorbing Sheets
1 X-Ray Template
1 Steri-Box Organizer
1 Instructions for Use

IMPLANT DRIVERS

AR-8-1 (Atlas Hand Driver)
1 Atlas Hand Driver
AT-110-1 (Atlas R/A Handpiece Driver)
1 Atlas R/A Handpiece Driver
MR-120 (Hand Adapter for R/A Driver)
1 Hand Adapter for R/A Driver
MR-120 (Ratchet Driver)
1 Ratchet Driver
MPD-AT-1 (Atlas Ratchet Insert)
1 Anew Ratchet Insert

TUF-LINK SILICONE MATERIAL

TK-102/TK-103 (Tuf-Link Silicone 10 ml Cartridge)
1 Tuf-Link Silicone 10 ml Cartridge
3 Auto-Mix Tips
(US Customers only: Buy 1 TK-102 Get 1 Free)
TK-T-10 (Auto-Mix Tips for 10 ml Cartridge)
10 Auto-Mix Tips for 10 ml Cartridge
TK-G-10 (Auto-Mix Dispenser for 10 ml Cartridge)
1 Auto-Mix Dispenser for 10 ml Cartridge
TK-502/TK-503 (Tuf-Link Silicone 50 ml Cartridge)
1 Tuf-Link Silicone 50 ml Cartridge
10 Auto-Mix Tips
TK-T (Auto-Mix Tips for 50 ml Cartridge)
10 Auto-Mix Tips for 50 ml Cartridge
TK-G (Auto-Mix Dispenser for 50 ml Cartridge)
1 Auto-Mix Dispenser for 50 ml Cartridge
TLC (Tuf-Link Set)
1 Tuf-Link Silicone 10 ml Cartridge
3 Auto-Mix Tips
3 Atlas Denture Forming Instruments: 1 Half-Round, 1 Grooved, 1 Spherical

ACCESSORIES

AR-60 (Spherical Denture Forming Instrument)
(US only)
1 Spherical Denture Forming Instrument
AR-19 (Grooved Denture Forming Instrument)
(US only)
1 Grooved Denture Forming Instrument
AR-32 (Half-Round Denture Forming Instrument)
(US only)
1 Half-Round Denture Forming Instrument
AR-10 (Set of Atlas Denture Forming Instruments)
3 Atlas Denture Forming Instruments: 1 Half-Round, 1 Grooved, 1 Spherical
AR-15 (Fixed Analogs)
4 Fixed Analogs
AR-151 (Denture Marking Caps)
20 Denture Marking Caps

ATLAS MARKETING TOOLS

AM-5 (Front Office Brochures)
100 Front Office Brochures

What Makes the Atlas Different…

Installation of the Tuf-Link Silicone Reline

Introduction to the Atlas Implant

 

Atlas Mandibular Denture by Dr. Ziv Mazor